Geeni Smart Wifi Camera (SETUP & More)

Geeni Smart wifi camera has many types and models. Setup and other settings for all models are very close and easy. How to set up is explained below. If we look at the general features of the cameras, the cameras of this company are the new generation. Full HD 1080P resolution, night vision, mutual talk, motion detection and notification sending features are available and these are features that can be adjusted according to your needs. There are slight differences in features and appearance between the cameras.

• Freebird Wire-Free Battery Smart Camera: Does not require a cable and provides a 135 degree angle of view.
• Hawk 3 1080p HD Outdoor Smart Wi-Fi Security Camera: It can work with Alexa. Your home provides 24/7 live security
• Look – Indoor Wi-Fi Surveillance Camera: It is a very suitable camera for indoor security. It has a stylish appearance and design. 128GB of built-in memory is available. It can work in coordination with services such as Amazon Echo devices and google assistant.

In addition to these, there are Geeni mini 6, Sentinel Smart Camera, IP Smart, Hawk Smart camera, Vision and wifi cam types.

How to setup Geeni Smart Wifi Camera

Note: For installation, you must make sure that you are connected to the 2.4 Ghz wifi network and you must know your wifi password.

Step 1: Download the Geeni App to your mobile phone from the App store or Google Play and register by opening the application

Step 2:

We open an account in the Geeni application, enter the verification code that comes to our mobile phone while registering. We enter the country code and e-mail address, then we create and confirm a password. Then we log in to the application with this information we have created.

Step 3:

When we open the application, we click on the Click + sign in the upper right corner. Here we choose Geeni Wifi Camera as the video camera.

The red light will start flashing on the device. Indicates that the device is ready to connect. If the red light does not flash, it is necessary to reset the device and start over.

Info: You can look at for Geeni doorpeek doorbell camera setup

Note: Likewise, we can add the device to the application with a QR code. After scanning the OR code, the connection is completed when the red light turns blue again.

Then we enter the wifi network and password. While the device is connecting, the red light continues to flash and beeps continuously, then when the solid blue light turns on, the connection is complete. The device is now ready for use.

• Although Motion Detection sensitivity is high, it does not detect and record motion.

This usually happens because you don’t give permission from your mobile phone. Find the application in the mobile phone settings and allow the application. Another slight reason may be that the motion detection sensor is broken.

• How to troubleshoot night vision

Night vision works automatically. But if you feel that there is a problem, you can switch to night vision manually. The red light on the LENS is illuminated for night vision. Close the lens completely, it will return to normal vision 5 minutes after turning it off.

• How to reset

To reset the Geeni wifi camera, press the hole next to the device for 5 seconds. It will give you an audible warning that the reset is done.

• Is it mandatory to insert a Micro SD Card?

You can watch the camera live without inserting a micro SD card. You can save images to your mobile phone. But you can do this from your mobile phone. You will benefit from the features of the phone. If you insert an SD card, your videos will be recorded as encrypted up to 128 GB. In order to use your camera more effectively, it is necessary to use an SD card.