Lenovo Thinkplus LP5 (Setup FAQ and Troubleshooting)

How to pair Lenovo Thinkplus L5 with a mobile device?

First, check the bluetooth of your mobile phone. The pairing process in the headphones is automatic, and the devices recognize each other automatically. When you take the earphones out of the charging case, the led lights turn white and red and pairing starts. If there is no sound from a headset, you should reset and pair again. Usually, such things happen in the first installations, this does not mean that the device is defective.

Why can’t your wireless headphones sync?

• First of all, bluetooth may detect your headphones separately. Therefore, cancel the previous bluetooth connection and clear the cache of your mobile phone.
• Then reset both earphones one by one and you need to do this 2-4 times. How to reset the headphones is described in this article.
• The headphones will work when you pair them again later.

Note: There are a lot of questions about this. Common questions are like one of my headphones is not working, or one by one is working and not syncing.

The answer to all these questions resets the device. But do this properly. After canceling the previous connections, you need to reset the headphones 2-3 times. That’s the solution.

Likewise, this is the solution to matching problems that may occur. In other words, do not reset once, but reset until it is fixed.

How to reset the Lenovo L5 earbuds?

If you are having pairing problems with your headphones or if there is no sound from one earphone, you need to reset your earphones.

• Take the headset out of the charging box. Touch the touch panel 7 times to get it in pairing mode. The headphone light will flash white/red.
• Then touch the touch panel 6 times. Headphone light blinks white 3 times and then turns off. Then you can place the headset back in the charging case.
• Repeat the same operations 2 times for both earphones.

How to charge the earbuds?

After plugging the earphones into the charging box, charging begins. The light flashes red during the charging process, and stops when charging is complete.

You can charge the charging box with USB. The meanings of the power indicator are as follows;

• Less than 25%: One flashing light
• Between 26-50%: One steady and one flashing light
• Between 51-75%: Two steady lights and one flashing light
• Between 76-100%: Three steady lights and one flashing light.

Lenovo Thinkplus L5 is a device that you can use comfortably even in noise with its smart noise canceling feature. With the proliferation of such devices, practicality has come to the fore. Lenovo has presented the settings that we can easily get out of the box and start listening to right away, with a simple and affordable device.

It also has a simple solution for any device related issues. You reset the device after disconnecting from the previous bluetooth and clearing the cache. Whatever the error you get, you will see that your problem is gone when you reset it until it is fixed.